Conferences
Our Recently Conference Awards
.png)
.png)
.png)
2024
Sajan Kapil
DAAD Alumni workshop?, 2024, Delhi, India
Sajan Kapil, Ambrish Singh
DEM Analysis for the Development of a Gravity-Driven Multi-Material Powder DED System?, Powder Technology Conclave & Exhibition, Thapar Institute of Engineering and Technology (TIET), Patiala, March 6-8 2024
2023
Ankan Das, Himangshu Kalita, Sajan Kapil, and Pankaj Biswas
A numerical technique of analyzing temperature distribution in friction stir lap welding of Al-Mg-Si alloys under different process parameters,? 9th International 30th All India Manufacturing Technology, Design, and Research Conference, 8th?to 10th?December 2023
Aakash Tyagi, Sajan Kapil, Manas Das
Powder layer preparation by novel gravity based powder spreading system for additive manufacturing?, 9th?International 30th?All India Manufacturing Technology, Design and Research Conference, 8th?to 10th?December 2023
Kanak Jindal, Sajan Kapil, Basireddy Sandeep Reddy
A novel 5 axis hybrid scissor-based machine tool for additive manufacturing?, 9th?International 30th?All India Manufacturing Technology, Design and Research Conference, 8th?to 10th?December 2023. (Best Paper Award)
Ambrish Singh, Sajan Kapil, Manas Das
A non-pneumatic method of powder feedstock handling in directed energy deposition?, The Austrian Society for Metallurgy and Materials (ASMET), Vienna/ Austria, 17-19 October 2023
Ritam Sarma, Sajan Kapil, Shrikrishna N. Joshi
Computer Aided Process Planning for multi axis deposition during robotic wire based directed energy deposition?. 8th Metal Additive Manufacturing Conference (MAMC), 17th -19th Oct 2023, The Austrian Society for Metallurgy and Materials (ASMET), Vienna/ Austria, 17-19 October 2023. (Runner-up Prize)
Atul Singh Rajput, Sajan Kapil, and Manas Das
Surface Enhancement of Additively Manufactured Biomedical Implants through H-ECMR Finishing?, The Austrian Society for Metallurgy and Materials (ASMET), Vienna/ Austria, 17-19 October 2023
Atul Singh Rajput, Sajan Kapil, and Manas Das
Surface Enhancement of Additively Manufactured parts? ASME Areo 3D conference 13-14 Dec 2023
Ambrish Singh, Sajan Kapil, Manas Das
A Novel Non-Pneumatic Method for Continuous Powder Metering, Mixing, and Dispensing for Applications in Laser-Based Directed Energy Deposition?, ASME Areo 3D conference 13-14 Dec 2023
Rie Bamba, Sajan Kapil, Koji Kinoshita, Sathesh Raja, Umesh Melkani, and Ritam Sarma
Geometrical Investigation of Low Carbon Steel Deposition over Corroded Substrates?, ASME Areo 3D conference 2023
Ritam Sarma, Sajan Kapil, Shrikrishna N. Joshi
Framework for Computer Aided Process Planning of Multi Axis Deposition During Repair of Mechanical Components Through Robotic Wire Based Directed Energy Deposition?. ASME Areo 3D conference 13-14 Dec 2023
Umesh Melkani, Sathesh Raja, Sajan Kapil, Swarup Bag
Deposition rate improvement in GMAW-based wire arc additive manufacturing, ASME Areo 3D conference 13-14 Dec 2023 (2nd?Runner-up Prize)
S. Raja, U. Melkani, R. Sarma, S. Kapil, N. Muthu
Effect of fiber holding techniques in the fabrication of continuously reinforced metal matrix composite adopting wire arc additive manufacturing?. ASME Areo 3D conference 2023, (1st?Runner-Up Prize)
Prasad, Avadh Kishore, Swarup Bag, Sajan Kapil, and M. Ruhul Amin
Metal Transfer Behavior and Droplet Characteristics of High-Frequency Induction Heating System Towards the Development of Additive Manufacturing Process.? In ASME International Mechanical Engineering Congress and Exposition, vol. 87677, p. V010T11A030. American Society of Mechanical Engineers, 2023
Akash Dilip Kamble, Ambrish Singh, Dipendra Singh, Dudul Das, Sajan Kapil, and Pankaj Kalita
Feasibility Study of Heat Transfer Enhancement in Solar Photovoltaic-Thermal Systems Using FDM Generated Novel Curved Thermal Absorbers.? In Gas Turbine India Conference, vol. 87721, p. V001T03A005. American Society of Mechanical Engineers, 2023
Harsh Ajay Rana, Sajan Kapil
Redundantly Actuated Hybrid Kinematic setup for high Manipulability?, 6th?international conference of the Robotics society, IIT Ropar, July 5-8 2023
Sajan Kapil, Ambrish Singh
A Novel Non-Pneumatic Method of Powder Feedstock Handling for Directed Energy Deposition-based Additive Manufacturing?, International Conference on Powder Metallurgy and Particulate Materials (PM 23) + Exhibition & 48 Annual Technical Meeting of PMAI, The Lalit Mumbai, 13 to 15 March 2023 (Invited talk
2022
Subhashis Majumder, Sajan Kapil, Pankaj Biswas, Nisith Ranjan Mandal
Design and Development of GMAW Nozzle for Underwater Dry Welding using Compressed Air?, Asian Conference on Mechanics of Functional materials and Structures (ACMFMS 2022), ??????????? 2022
Subhojit Jash, Sajan Kapil, Subramnai Kanagaraj
Review of underwater Health Monitoring Devices and Drowning Detection Methods?, International Conference on Biomaterials?, Regenerative Medicine and Devices? 2022
Subhojit Jash, Sajan kapil, Subramnai Kanagaraj
Development of Rescue System for Swimmers and Underwater Divers?, 8th Asian Conference on Mechanics of Functional Materials and Structures (ACMFMS2022), 11th ? 14th December 2022
Brijesh K. Singh, Sajan Kapil, and Shrikrishna Nandkishor Joshi
Numerical Modeling and Simulation of Micromachining of Biomedical Materials Using Nd: YAG Millisecond Pulse Laser.? In Low Cost Manufacturing Technologies: Proceedings of NERC 2022, pp. 155-164. Singapore: Springer Nature Singapore, 2023
Sathesh Raja V, Ritam Sarma, Umesh Melkani, Sajan Kapil and Nelson Muthu
Investigation of fiber holding techniques for the fabrication of continuously reinforced Metal Matrix Composites using wire arc additive manufacturing,? Bio-Remidi 2022, 14th December 2022
Ankan Das, Himanshu Kalita, Sajan kapil, Pankaj Biswas
Utilization of Friction Stir Welding to Fabricate 3D Objects in Metal Additive Manufacturing? presented in North East Research Conclave (NERC 2022), 20th ? 22nd May 2022
Ankan Das, Sajan Kapil, Pankaj Biswas
Feasibility Study for Fabricating Smart Structures Using Hybrid Additive Manufacturing Based on Friction Stir Welding? 8th Asian Conference on Mechanics of Functional Materials and Structures (ACMFMS2022), 11th ? 14th December 2022
Sajan Kapil, Prathamesh Joshi, Sadaival Singh and Ambrish Singh
Functionally Graded Materials TSP Solver?based Toolpath for Additive Manufacturing of Density?based?, International Conference on Precision, Micro, Meso and Nano Engineering (COPEN), IIT Kanpur, India 08-10 December 2022 (Invited paper)
Anand Mohan Pandey, Sajan Kapil, Manas Das
Metal Based ?-Additive Manufacturing by Localized Electrochemical deposition?, International Conference on Precision, Micro, Meso and Nano Engineering (COPEN), IIT Kanpur, India 08-10 December 2022 (Best Paper Award)
S Majumder, Sajan kapil, P Biswas, N R Mondal
Experimental Investigation on Underwater Gas Metal Arc Welding System?, International Conference on Precision, Micro, Meso and Nano Engineering (COPEN), IIT Kanpur, India 08-10 December 2022
Ambrish Singh, Sajan Kapil, Manas Das
A Non-Pneumatic Method of Powder Feedstock Handling in Laser-based Directed Energy Deposition?, International Conference on Precision, Micro, Meso and Nano Engineering (COPEN), IIT Kanpur, India 08-10 December 2022 (Best Paper Award)
Vishal Yadav, K. Varshith, Sajan Kapil
A Volumetric Approach based Reverse Engineering Method of Reconstruction of the CAD Models?, International Conference on Precision, Micro, Meso and Nano Engineering (COPEN), IIT Kanpur, India 08-10 December 2022
Atul Singh Rajput, Sajan Kapil, and Manas Das
Investigation on tribological behavior of additively manufactured bone plate polished through Magnetorheological Fluid Assisted Finishing process?, IndiaTrib, IIT Delhi, India, 12-14 December 2022, (Best oral paper presentation, Young Tribologist Award)
Atul Singh Rajput, Manas Das, and Sajan Kapil
Surface Enhancement of Additively Manufactured biomedical implants through Hybrid-Electrochemical Magnetorheological (H-ECMR) finishing?, International Conference on Precision, Micro, Meso and Nano Engineering (COPEN), IIT Kanpur, India 08-10 December 2022
Brijesh kumar Singh, Sajan Kapil, and S.N.Joshi
Numerical modeling of phase prediction and geometry evolution of micro-drilling using single pulse laser?, in THIRD International Conference on Future Technologies in Manufacturing, Automation, Design & Energy (ICOFT MADE 2022), NIT Puducherry, Karaikal ? 609 609, India Dec 14th -16th, 2022
C32 Atul Singh Rajput, Ritam Sharma, Rinku Kumar Mittal, and Sajan Kapil, 2022
Investigation of Chatter Vibration on Wire Arc Additive Manufactured Products During the Milling Operation?, 17th International Conference on Vibration Engineering and Technology of Machinery, VETOMAC, 2022, Nepal, paper 129, 14-16 December 2022
2021
Sajan Kapil, Ritam Sarma, and Harsh Ajay Rana
Challenges Associated with the Wire Arc Additive Manufacturing Systems?, National Seminar on ?Welding Science and Technology ? Present Status & Future Direction ?NSWEST-2021, 23rd July 2021 (Invited paper)
Sayan Doloi, Atul Singh Rajput, Sajan Kapil, Manas Das
Hybrid Additive Manufacturing of Knee Joint Implant: Possibilities and Challenges?, Advances in Forming, Machining and Automation ? Proceedings of AIMTDR 2021
Sajan Kapil, Ritam Sarma, and Harsh Ajay Rana, 2021
Challenges Associated with the Wire Arc Additive Manufacturing Systems?, National Seminar on ?Welding Science and Technology ? Present Status & Future Direction ?NSWEST-2021, 23rd July 2021 (Invited paper)
Ambrish Singh, Sajan Kapil, Manas Das, 2021
An Optimized Method of Powder Feedstock Handling in Directed Energy Deposition?,4th?International Conference on ??Holistic Innovation in Additive Manufacturing (HI-AM)?, 1st?? 2nd?June 2021, the University of Waterloo, Canada in Online Mode.?(Third place in the verbal presentation category)
C28 Sadaival Singh, Ambrish Singh, Sajan Kapil, 2021
Non-retractive toolpath planning using TSP solver?,4th?International Conference on ??Holistic Innovation in Additive Manufacturing (HI-AM)?, 1st?? 2nd?June 2021, the University of Waterloo, Canada in Online Mode
2020
Ritam Sarma, Sajan Kapil and Shrikrishna N. Joshi, 2020
A Hybrid Slicing Method to Eliminate the Need of Support Structures in Direct Energy Deposition Process?, National Online Conference on ?Research and Developments in Material Processing, Modelling and Characterization 2020? (RDMPMC-2020), 26th?? 27th?August 2020, NIT Jamshedpur India in Online Mode
Ambrish Singh, Sajan Kapil and Manas Das, 2020
Discrete Element Analysis of Gravity-Driven Powder Flow in Coaxial Nozzles for Directed Energy Deposition, National Online Conference on ?Research and Developments in Material Processing, Modelling and Characterization? (RDMPMC-2020), 26th?? 27th?August 2020, NIT Jamshedpur India in Online Mode
K P Karunakaran, Seema Negi, Arun Nambolan, Ashik Patel, Yogesh Patil, Milan Pandya, Sajan Kapil, Dmitriy Trushnikov, Michael Sealy and Alain Bernard, 2020
Challenges in path planning of high energy density beams for additive manufacturing?, IOP Conference Series: Materials Science and Engineering, Volume 759, conference 1
Bhagchandani R.K., Ghodke R., Manivannan R., Negi S., Kapil S., Karunakaran K.P., 2020
Characterization of Rapid Foam Castings Produced by Different Mold Making Processes?. In: Shunmugam M., Kanthababu M. (eds) Advances in Additive Manufacturing and Joining. Lecture Notes on Multidisciplinary Industrial Engineering. Springer, Singapore
C23 Negi S., Kapil S., Sharma A., Choudhary P., Bhargava P., Karunakaran K.P., 2020
Retrofitment of Laser Cladding System with CNC Machine for Hybrid Layer Manufacturing?. In: Shunmugam M., Kanthababu M. (eds) Advances in Additive Manufacturing and Joining. Lecture Notes on Multidisciplinary Industrial Engineering. Springer, Singapore
2019
Karunakaran, K.P., Seema Negi, Athul Nambolan, Ashik Patel, Yogesh Patil, Milan Pandya, Sajan Kapil, Dmitriy Trushnikov, Michael Sealy and Alain Bernard
Path Planning Challenges of HED Beams?, 2019, 3rd International Conference on ?EBW & Related Technologies?, Moscow Power Engineering Institute, Moscow, Russia
Sajan Kapil, Seema Negi, and K P Karunakaran
PowerMill & PowerShape for 3D Printing?, Autodesk Moldflow/PowerMILL Summit, Pune, 28th?May 2019
Sajan Kapil, Seema Negi, and K P Karunakaran
“PowerMill & PowerShape for 3D Printing”, Autodesk Moldflow/PowerMILL Summit, Pune, 28th May 2019